Challenges of Inspecting Pumped Foods and How to Overcome Them with Pipeline X-ray Inspection

3 December 2015



Challenges of Inspecting Pumped Foods and How to Overcome Them with Pipeline X-ray Inspection


Challenges of Inspecting Pumped Foods and How to Overcome Them with Pipeline X-ray Inspection

By Kyle Thomas, Strategic Business Unit Manager, Eagle Product Inspection

Kyle Thomas, Strategic Business Unit (SBU) Manager at Eagle Product Inspection, is responsible for research and development and the expansion of Eagle's product portfolio to meet the demands of existing and potential customers in the food and beverage manufacturing and processing market

Intensified food safety regulations, the rising cost of raw materials and growing competition from international food brands are forcing more and more food manufacturers in the US and Europe to look at new ways to comply with health and safety demands, while optimizing production line efficiency.

When properly installed and operated, product inspection equipment can help manufacturers realize these goals. However, pumped production lines can prove difficult for traditional inspection systems. This article shows how pipeline x-ray technology can help manufacturers ensure the safety and quality of a wide range of pumped food applications.

What challenges do pumped production lines present manufacturers when it comes to product inspection?

A wide range of processed food passes through pipelines every day, from meat and poultry to dairy products, fruit and vegetables to confectionery. However, contamination detection in pumped products can prove problematic for the following reasons:

  • Processing makes it harder for traditional inspection systems to detect foreign bodies as contaminants are often broken down into smaller, less identifiable pieces
  • Removing contaminated product on pumped lines can prove tricky and reject portion sizes tend to be larger for pumped applications. This is because standard reject mechanisms can't isolate a single item
  • Downtime is a possibility, caused by contaminants damaging downstream processing equipment, such as grinders
  • Product passing through a pipe performs differently to product travelling on a conveyor so speed variations must be taken into account
  • Pipework can run across roofs or be at an angle, making it challenging to incorporate inspection technology.

What impact can these factors have on production line efficiency?

Using traditional product inspection solutions, the factors above can have an impact over and above issues with minimizing the risk of contaminated product reaching consumers.

First, the product that's being rejected accrues more and more cost as it moves down the production line, generating more financial loss.

Second, to ensure contaminated product is removed from the production line, it may be necessary to reject additional conforming product, thereby increasing waste.

Third, to ensure accurate detection with traditional solutions, it may also be necessary to use narrow pipework, which can decrease throughput rates, thereby slowing down the production line and reducing productivity.

How can manufacturers optimize contaminant detection on pumped lines?

Manufacturers can enhance contaminant detection on pumped lines by installing a pipeline x-ray inspection system. Pipeline systems contain a flat manifold inspection area which promotes uniformity of inspection and maximizes detection of dense contaminants, including metal, glass, mineral stone, calcified bone, high-density plastics and rubber compounds.

Innovative systems are available with a range of fully-integrated reject valves, including a three-way ball valve. All valves can be synchronised to the pump, minimizing rejected portions and saving costs.
Advanced systems also allow very accurate setup of the reject valve to shorten the time it's open, reducing product waste.

Market-leading pipeline x-ray systems are available which have a reject valve with a blade for solid/muscular products that can cut out and reject just the contaminated product, minimizing the amount of good product rejected. Such systems may also contain a sensor to help ensure contaminated product is rejected, even if the speed of the pumped product changes.

Pumped production lines pose a challenge when it comes to maintaining optimal hygiene standards. However, advanced pipeline x-ray systems feature a uniquely robust, Ingress Protection (IP) 69 compliant design which supports and facilitates rigorous hygiene regimes, maximizing uptime and optimizing productivity. In fact, equipment can be disconnected from pipework for easy cleaning.

Regular equipment maintenance can also be an issue on pumped production lines, as can performance testing, which is a requirement for compliance with many Global Food Safety Initiative (GFSI)-approved standards.

However, modern pipeline x-ray systems have a number of features designed to simplify maintenance and testing procedures for manufacturers, enhancing Overall Equipment Effectiveness (OEE) and Return on Investment (ROI).This includes piping and inspection manifold systems which can easily be removed for cleaning and maintenance. Further, some x-ray system manufacturers also supply an optional infeed pipe with a test piece insertion port, which allows machine operators to perform regular testing.

What is the value of integrating x-ray inspection at the pumped production stage?

Despite the challenges presented by the pumped stage of a production line, the benefits of inspecting pumped foods before final processing and packaging are numerous. Contamination detection levels are typically better in the early stages of the production process, where unprocessed pumped product can be presented in a shallower depth and with a more uniform (homogeneous) texture than in sealed packs.

What's more, catching contaminants early can allow manufacturers to recover product and feed it back into the line after contaminant removal, thereby lowering waste while helping to prevent damage to downstream processing equipment caused by larger contaminants. In addition, isolating
and removing contaminants during this stage of production saves packaging materials and the related cost that would have been wasted if inspection only occurred after final packaging.

 

Additionally, when installed early in the production process, product inspection systems can serve as a check on suppliers' quality control, as well as ensure that any contaminants are removed before further value is accrued through processing.

Can manufacturers overcome all product inspection challenges by locating x-ray systems at the pumped production stage?

Not all product inspection issues can be surmounted by locating x-ray systems at the pumped production stage. It's important to establish Critical Control Points (CCPs) to mitigate any risks and install product inspection equipment at these points to reduce the risk of contamination to acceptable levels.

Pipeline inspection systems can be used at different stages on a production line, depending on the identified CCP. However, a common location is at the start of the production process when product value is low and the risk of contamination from incoming raw materials is at its highest. Since pumps can run across roofs and at angles, a common challenge is finding the right location to incorporate a product inspection machine. A popular solution is to build a platform to host the x-ray machine.

Furthermore, end of line x-ray equipment is also available which, in addition to contaminant detection, is simultaneously capable of performing quality control checks, such as measuring mass, counting components, monitoring fill levels, measuring head space, checking seal integrity and identifying damaged products and packaging.

Why is it important that pumped food manufacturers optimize contaminant detection?

Enhancing contaminant detection on pumped food lines is crucial to comply with food safety standards and regulations. In fact, recent changes in food safety standards are driving the adoption of x-ray inspection.

As well as helping manufacturers adhere to a diligent Hazard Analysis and Critical Control Points (HACCP) program, installing an x-ray pipeline inspection system can help manufacturers achieve compliance with GFSI-recognized standards, such as the British Retail Consortium (BRC) Global Standard Version 7, as well as the US Food Safety Modernization Act.

X-ray inspection can also help manufacturers adhere to national food safety regulations and major retailers' food safety requirements.

Compliance with food safety regulations is vital to access lucrative overseas markets, minimize the risk of expensive, brand-damaging product recalls, and safeguard consumers.

Conclusion

Inspecting pumped foods has traditionally proved challenging for the reasons outlined above but, as this article shows, these difficulties and complexities can be overcome with the right product inspection solution.

Installing a robust and reliable pipeline x-ray system can help manufacturers protect their customers and their brands' reputations, while simultaneously saving costs by maximizing uptime and minimizing product waste.

 

 

 



Privacy Policy
We have updated our privacy policy. In the latest update it explains what cookies are and how we use them on our site. To learn more about cookies and their benefits, please view our privacy policy. Please be aware that parts of this site will not function correctly if you disable cookies. By continuing to use this site, you consent to our use of cookies in accordance with our privacy policy unless you have disabled them.